Imicryl I.Q. Heat-Cure Acrylic Liquid, 250 ml
250 ml liquid component of the Imicryl I.Q. heat-cure acrylic system; methyl methacrylate based, mixed at 25 g powder to 10 ml liquid.
- Product code
- I.Q.
- Stock code
- 8698973131474
We do not publish prices; they depend on size and quantity.
Description
Imicryl I.Q. liquid is the monomer component of the heat-cure acrylic system used to fabricate complete and partial dentures, and it is used with I.Q. powder. The mix is proportioned at 25 g of powder to 10 ml of liquid; at 23 °C it reaches dough consistency in 8 to 12 minutes and stays workable for about 45 minutes. Polymerisation is completed by curing for 20 minutes in water at 100 °C, so the material fits the conventional flasking and water-bath workflow. It is manufactured to BS 2487 Type 1 Class 1, falls under an ISO 13485 quality management system and carries CE marking. The monomer is volatile and flammable, so keep the bottle tightly closed and store it cool, ventilated and out of direct sunlight. The 250 ml pack suits laboratories that stock powder and liquid separately and go through liquid at their own rate.
Specifications
| Product type | Heat-cure acrylic liquid |
|---|---|
| Composition | Contains methyl methacrylate monomer |
| Pack size | 250 ml liquid |
| System | Used with Imicryl I.Q. heat-cure acrylic powder |
| Powder / liquid ratio | 25 g powder to 10 ml liquid |
| Dough time | 8–12 minutes at 23 °C |
| Working time | 45 minutes |
| Polymerisation | 20 minutes in water at 100 °C |
| Standard | BS 2487 (Type 1, Class 1) |
| Quality / certification | ISO 13485 quality management system, CE |
| Intended use | Complete and partial denture fabrication |
Similar products in this category
View all →
